- Reduces energy costs by up to 80%
- Compatible with most A/C units
- Battery operated
- Easy installation
- Built in comfort night sensor
All quantity discounts are applied on the basket page.
|1 - 2||£59.00 Per Unit|
|3 - 16||£55.00 Per Unit|
Ecosense uses Passive Infra Red (PIR) technology to scan the room for occupancy. PIR will only detect body heat and will not therefore be affected by items such as ceiling fans, curtains etc. When no movement is detected it will send a signal to the air conditioning (A/C) unit to switch it off. Ecosense also has a comfort night sensor enabling the A/C to be used, if required, throughout hours of darkness. Ecosense 2000 is compatible with most A/C units.
View our installation video
After the occupant has left the room, Ecosense will continue to scan the room for a pre –set time – 15,30 or 45 mins before sending the signal to turn off the A/C.
Learn / Test
Once Ecosense has copied the infra red ( IR) signal from the A/C remote controller, by pressing the ‘test’ button, you can test the unit to ensure the IR signal has been copied correctly.
There is an optional ‘comfort’ night setting. If selected, it will allow the A/C to operate throughout the hours of darkness.
If at any time you wish to clear settings, there is a clear memory function to allow the unit to revert to factory default.
Tamper proof lockable keypad
In order to operate the function buttons, it is necessary to first enter a secure access code.
Switch on your A/C using the remote controller.
Take A/C remote controller out of the room and press the ‘OFF’ button as if you were switching the A/C off.
Return to the room where the A/C is running. Press ‘OFF’ button again as if you were switching the A/C off.
If your A/C unit beeps but continues to run then your system is compatible with Ecosense 2000. Alternatively, should the A/C unit beep but switch off we would recommend Ecosense 4000 , which will be compatible with your unit.
- Fixing kit
- Extended PIR cable