Ecosense

Ecosense 5000

From £135.00

  • Reduces energy costs by up to 80%
  • Compatible with most hard wired controlled air conditioning units
  • Mains powered (110- 230 V 50 – 60 KHz)
  • Multiple setting options
  • Key coded for secure access
  • Tamper proof connectivity
  • Includes 1 x door / window sensor
  • RF communication with additional optional accessories
  • Approved by leading brands such as Toshiba, Daikin

Pricing

All quantity discounts are applied on the basket page.

QuantityPrice
1 - 2£139.50 Per Unit
3 - 16£135.00 Per Unit

Ecosense 5000 is compatible with most A/C brands that are controlled by a hard wired wall controller. This model is mains powered and can be fitted either on the ceiling or wall. Ecosense 5000 requires a mains power supply and a duel low voltage connection to the A/C’s PCBA. The 5000 model controls the A/C by using the volt free “forced off” terminals.

Ecosense 5000 contains a 2.4G RF communication module allowing RF connectivity with a number of wireless optional accessories such as door/window sensors, and auxiliary PIR detectors. Ecosense 5000 is supplied with one door/window sensor. A maximum of eight door/window sensors can be controlled by one Ecosense 5000.

The 5000 model has a range of function options allowing you to control the A/C in accordance with your own particular requirements , please see installation instructions for more information on options available.

STANDARD MODE

Timer
After the occupant has left the room, Ecosense will continue to scan the room for a pre –set time delay of 15, 30 or 60 mins before sending the signal to turn off the A/C.

Learn / Test
Once Ecosense has copied the infrared (IR) signal from the A/C remote controller, by pressing the ‘test’ button, you can test the unit to ensure the IR signal has been copied correctly.

Night setting
Should you not require Ecosense to control your A/C during the hours of darkness there are 2 night setting options.
Comfort Plus – allows the A/C to continue operating for two hours after darkness has been detected, after which time Ecosense 5000 will switch off the A/C.
Night Setting – Ecosense 5000 will go to sleep and not interfere with the operation of the A/C during the hours of darkness.

Tamper proof lockable key pad
In order to operate the function buttons, it is necessary to first enter a secure access code. A unique four-digit button lock code of your choice can be set up if required.

Door / Window sensor
A maximum of eight wireless door or window sensor can be paired to each Ecosense 5000. When a sensor is open for more than three minutes the AC will be terminated.

Auxilary PIR
A wireless PIR that can provide additional PIR coverage when controlling the AC in heat mode is a necessity.

Set Back
Ecosense can be programmed to adjust the AC setting to a more economic mode if left running when the room is unoccupied.

OCCUPANCY MODE
A methodology most frequently used by the hotel industry. Suitable for a room or apartment that has one or more entry exit doors. By fitting a door sensor to any entry/exit doors Ecosense will allow the AC to operate regardless of movement detection be it day or night provided the room is occupied.

Dimensions: 20 × 15 × 6 cm
  • Sensor
  • ‘Eyelid’
  • Fixing kit
  • Extended PIR cable
  • 1 x Door / Window sensor